MGM Servizi Geologici
ITENG
Request a survey

MGM Servizi Geologici · Penetration tests

DPSH, DPM, SCPT and CPT penetration tests

Penetration tests are quick, low-cost investigations that immediately give the geotechnical properties of the soils they pass through.

Pagani penetrometer seen from the front during a CPT test in a meadow
CPT test with the Pagani TG 63-200.

Penetration tests characterise the subsurface by measuring the resistance of the ground to the penetration of a metal cone. The results give the geotechnical parameters needed to check the foundation–ground system, throughout the volume of ground affected by the structure.

We carry out DPSH, DPM, SCPT and CPT tests. We have two penetrometers, so we can work in any conditions:

  • Pagani TG 63-200, tracked, with 200 kN of thrust, for super-heavy dynamic probing (DPSH) and CPT tests: the main instrument on accessible sites;
  • Geo Deep Drill DL10-DM30, compact and light, for medium dynamic probing (DPM) where the Pagani cannot go: courtyards, alleys, steep slopes and confined spaces.

The penetrometers

Pagani tracked penetrometer on a hillside meadow, with the sky and the hills in the background

Static and dynamic penetrometer

Pagani TG 63-200

The main instrument for penetration tests on accessible sites: super-heavy dynamic probing (DPSH) and CPT tests.

TestsDPSH (super-heavy), CPT
Maximum thrust200 kN
Maximum pull-out force205 kN
Weight1,100 kg
Traveltracks; max. gradient 25% front, 10% side
Dimensionsabout 2.5 × 1.1 m in transport; working height up to 4.1 m
Anchoring2 screw anchors with gear motor
Geo Deep Drill light penetrometer at work inside a room, seen through the open French window

Medium dynamic penetrometer

Geo Deep Drill DL10-DM30

Compact and light, for medium dynamic probing (DPM) where the Pagani cannot go: courtyards, alleys, steep slopes, confined spaces and interiors.

Testmedium dynamic probing (DPM), ISSMFE 1988 classification
Hammerhydraulic, 10 or 30 kg
Drop height20 cm (50 cm optional)
Rate40–50 blows/min
RodsØ 22 mm; blow count every 10 cm
Investigation depth10–15 m
Extractionhydraulic extractor, about 1,500 kg
SamplingØ 38 mm auger down to 5–6 m; Ø 40 mm PVC sampler down to 3–4 m
Enginecompact hydraulic power pack with 3.5 hp petrol engine
Weightabout 125 kg in the modular version (column 45 kg, power pack 32 kg, trolley 21 kg)
Working gradientsup to 35% side and 45% front

Where we work

Our office is in Ascoli Piceno: we work in the city and the province, in the Marche, Abruzzo and Lazio, and throughout Italy.

Our other services

Do you need penetration tests?

Tell us what you need and we will give you the COMPLETE solution.

+39 320 698 0036info@mgmgeologia.it