We install micropiles for foundations, strengthening and underpinning of existing buildings, and ground anchors and tie-backs to stabilise slopes, retaining walls and earth-retaining structures.
Micropiles are small-diameter foundation piles, generally less than 30 centimetres. They are installed by drilling: steel reinforcement, a tube or bars, is placed in the hole and a cement grout is injected. They transfer the loads to deeper, stronger soil layers.
The machines are small compared with those used for conventional piles: this is why micropiles are often used where space is limited, or where there is an existing structure that must not be disturbed.
When they are needed
Foundations for new works, when the ground near the surface cannot carry the loads.
Strengthening and underpinning of existing buildings, for example when cracks appear because of ground settlement (see cracked buildings and settlement).
Retaining walls and earth-retaining structures.
Ground anchors and tie-backs to stabilise slopes and embankments (see landslides).
First investigate, then build
A micropile is designed for the real ground, not the assumed one. With boreholes, penetration tests and seismic surveys we reconstruct the layers and their properties; with the survey we fix geometry and levels.
Then we build the works with the same machines, owned by us and operated by our own staff: a single point of contact from fieldwork to the final report.
The machines
Three drill rigs of different sizes and power: so we can work from open sites to the narrowest courtyard, and indoors under low ceilings.
Tracked hydraulic drill rig
CMV MK 420D
The machine for high performance: micropiles and ground anchors, including large diameters, and, thanks to its tilting mast, inclined drilling.
Agile and low-impact, suited to paved and delicate areas: micropiles without damaging the surfaces.
Applications
micropiles, minipiles and ground anchors, even in hard-to-reach areas
Power
55 kW (75 CV)
Weight
3,900 kg
Pull force
24 kN
Modular drill rig
Soil Sistem S350 HY
It can be split into modules and reassembled even inside buildings, to reach the tightest and lowest spots: cellars, interiors, courtyards and narrow passages.
Power
75 kW (100 CV)
Weight
900 kg + 3,400 kg (two modules)
Pull force
20 kN
Where we work
Our office is in Ascoli Piceno: we work in the city and the province, in the Marche, Abruzzo and Lazio, and throughout Italy.